The editor believes that most of us are not unfamiliar with gearboxes, but even so, we may encounter some problems when operating them ourselves. At the beginning of use, the main issues are related to operation, such as inadequate technical skills and lack of usage techniques. Therefore, the performance of the equipment cannot be fully utilized. So today, the editor is here to show you some tips about using reducers.
1. When the oil temperature of the gearbox exceeds 80 ℃ or the oil pool temperature exceeds 100 ℃, or abnormal noise is generated during work, it should be stopped in a timely manner, the cause should be identified, the fault should be eliminated, and the lubricating oil should be replaced before continuing to operate.
2. When changing the oil in the gearbox, wait for the equipment to cool down until there is no risk of combustion, but still keep it warm because the viscosity of the oil will increase after complete cooling, which will make it difficult to drain the oil.
3. We should all have reasonable usage and maintenance rules and regulations, so that we can carefully record the operation of the reducer and the problems found during inspection, and strictly follow the above regulations.
4. After running the reducer for 200-300 hours, the first oil change should be carried out, and then the quality of the oil should be regularly checked in future use. Any oil mixed with impurities or deteriorated should be replaced in a timely manner.
The above is all about the tips for using reducers. Here, the editor needs to remind everyone that when changing oil, it is necessary to cut off the power supply of the transmission device to prevent accidental power on, so as to ensure our personal safety.
Language
