Reducer is a widely used equipment in industrial life, and it is highly favored by manufacturers due to its advantages. But recently, some users have raised concerns that the gearbox is prone to rusting. This is actually because the equipment is mostly made of steel, and if maintenance is not taken care of during use, the equipment will easily oxidize and rust over time, greatly reducing its service life. Therefore, today, the editor will take you to learn about several measures to prevent rusting of the gearbox.
1. Keep the surface of the reducer clean and dry.
2. Inject lubricating oil into the friction surface between moving parts to form an oil film, prevent metal contact, reduce wear, and prevent the rust proof layer from falling off.
3. Coat the surface of the gearbox with a layer of non rusting metal using electroplating, hot plating, and other methods to form a dense oxide film, thereby preventing the gearbox from rusting due to direct contact with substances such as water and air.
4. The rusting of the gearbox is mainly caused by the presence of oxygen and water in the lubricating oil, while corrosion is caused by acidic substances and sulfides in the oil. We can add anti rust and anti-corrosion additives to the oil to prevent rust from forming.
The above is all about preventing rust in the gearbox. Here, the editor needs to remind everyone that rust can seriously affect the service life of the equipment and reduce its efficiency. Therefore, we must pay attention to maintenance in our daily use of this equipment to ensure our production work and make full use of everything.
Language
