Precautions for the running in period of electric drum

With the rapid development of industry, the application of electric rollers is becoming increasingly widespread. We need to pay more attention to the running in period of the equipment. Only with proper protection can we extend the service life of equipment and work better for us. For the convenience of everyone, let's take a look at the precautions during the break in period.
1.Due to the influence of the processing, assembly, and debugging of new electric drum parts, the contact area of the mating surface is small, but the allowable torque is large. Electric drum, during operation, the concave and convex parts on the surface of the parts are embedded and rub against each other, and the falling metal shavings continue to participate in friction as abrasives, further accelerating the wear of the mating surfaces of the parts;
2. Poor lubrication: Due to the small clearance between newly assembled parts and assembly reasons, the lubricating oil is not easy to form a uniform oil film on the friction surface to prevent wear. As a result, the lubrication efficiency is reduced, and the electric drum causes early abnormal wear of the parts.
3. Loose parts, geometric shapes, and matching dimensions in newly processed and assembled parts. In the early stages of use, due to alternating loads such as impact and vibration, as well as the influence of factors such as heat and deformation, and excessive wear, it is easy for the originally fastened parts to loosen.
4. Leakage occurs when the sealing surface and pipe joints of the equipment leak due to loose parts, vibration, and the influence of electric drum heating. Some defects, such as casting, are difficult to detect during assembly and debugging, but due to vibrations and impacts during operation, this defect is exposed, which is oil leakage.
The above points are the precautions for the running in period of the electric drum. We hope that everyone can pay special attention while understanding them. If you have any questions, you can follow our website or contact us directly.