In actual production, belts and electric rollers are often used together, and sometimes the use of rollers may be slightly affected. In this issue of news and information, the editor will introduce the impact of belts on electric rollers. Let's learn about it together.
1. After installing the electric drum, the appropriate standard is that the belt is sufficient to transmit traction and the belt will not slip during load operation. Do not over tension the belt, otherwise it may cause excessive drum noise and bending deformation of the front and rear axles. When adjusting the belt, the reversing drum should be parallel, and the belt should be evenly tensioned, otherwise it may cause the belt to deviate or be damaged.
2. The electric drum relies on belt heat dissipation, so it is prohibited to operate without installing a conveyor belt. Otherwise, the surface temperature of the cylinder will rapidly rise, and the internal heat cannot be released in a timely manner, thereby burning out the motor
3. The width of the conveyor belt needs to cover more than 2/3 of the width of the electric drum to prevent the drum from overheating due to the inability to release heat inside the drum in a timely manner.
Electric drum can replace the widely used motor reducer type external drive device to form a belt conveyor, which can transport bulk materials such as coal, ore, sand, cement, flour, as well as bulk items such as burlap and equipment. The electric drum has a simple and compact structure, occupying a small space area. Good sealing, suitable for workplaces with high dust concentration, damp and muddy conditions. The drum is easy to use and maintain, reliable to operate, and has a long service life. Low energy consumption and easy to achieve centralized control. It can meet various needs such as reverse, braking, and rubber wrapping.
The current scope of use of electric rollers is very extensive, which is closely related to their own usage characteristics. In the process of use, we need to understand their characteristics and make targeted choices. When choosing equipment models, we need to understand the knowledge and characteristics of the product, so as to better choose products that meet our usage needs.
The above is the impact of belts on electric rollers that we need to pay attention to, as it is related to production and cannot be ignored. For better use, we hope everyone will pay attention during the usage process. Do not damage it.
Editor: Chihiro
Language
