If the electric drum parts are used for a long time, they will be damaged. At this point, we need to promptly identify damaged parts and carry out repairs or replacements. So, what are the easily damaged components of the electric drum? Next, the editor will tell everyone. Let's take a look together.
1. Support bracket. In some regions, it is also known as drum tile seat or drum bearing seat, usually made of gray cast iron, hard and brittle, and damaged by collision during distribution or dropped from the drum during lifting. Except for the ZB explosion-proof electric drum sliding bearing, which is made of 45 # steel, it is difficult to be damaged by collision.
2. Roller casting rubber surface. On the rubber surface of drum casting, whether it is an electric drum, a transmission drum, or a reversing drum, rubber coated drums or rubber cast drums can be made according to the user's needs. During logistics transportation, the rubber surface is relatively easy to damage compared to the drum and steel bearing seat.
3. Electric drum end cover and internal components. When dropped during the lifting process, it usually causes damage, resulting in a concave end face of the cylinder or damage to the internal drum gear.
4. Terminal block and junction box. Especially for the terminal block, which is made of cast iron and has a very thin connection position, the junction box protrudes from the drum and is easily damaged. It should be noted that some drum junction boxes have long explosion-proof tails, which are easily damaged by collisions. However, some junction boxes are directly fixed to the motor and are generally not easily damaged.
The electric drum is mainly composed of a motor and a reducer, which are placed inside the drum as a whole. There is also a drum body inside, which is used to support the drive belt and make it move. It is necessary to connect the end cover, pressure cover, bearings and other components to the drum body itself, and use brackets and front and rear shafts to support the equipment as a whole. Undoubtedly, the motor, transmission mechanism, and other components make up the entire drum equipment and are an indispensable part of it.
The above is the content of this news and information. When using electric drum equipment, it is necessary to pay attention to the maintenance and upkeep of the equipment to ensure its normal operation, especially the maintenance and inspection of these parts. The damage of parts is often the cause of equipment damage.
Editor: Chihiro
Language
