With the development of the economy and the advancement of technology, electric rollers can replace gearbox type external transmission devices and are becoming increasingly widely used. This type of equipment requires refueling to be convenient to use, and many people have many misunderstandings about refueling equipment. Let's take a look at the key points to note when refueling electric rollers:
1. Replace the lubricating oil after 300 hours of equipment operation, and then replace the oil every 5000 hours for maintenance.
2. The electric drum needs to be started with no load.
Before use, check the oil inside the drum, which should be 2/5 of the drum diameter; Check if the wiring of the motor is correct (note: the drum is in an oil-free state when it leaves the factory).
4. Regularly check the oil level, adjust the oil seal spring or replace the oil seal according to the sealing condition.
Based on the above introduction, we can know the method and specific requirements for refueling electric drum. If there are inappropriate refueling methods in your practical application, you should correct them in a timely manner. Incorrect refueling methods can cause problems with equipment operation.
Editor: Fairy
Language
