Electric drum is a relatively large equipment, and various heavy materials can also be transported using this equipment. However, this also requires high requirements for the various components of the equipment, which need to be able to withstand a lot of pressure. However, some parts of the equipment are still weak due to their own reasons. Let's take a look at the vulnerable parts below.
1. Bearing: This component is very easy to damage. Lack of lubricating oil or untimely oil change may lead to poor oil quality, or the addition of some miscellaneous oil may deteriorate the quality of the oil, or even lose its lubrication performance. This can cause bearing damage, and if the lubricating oil contains impurities, it can also cause abnormal wear of the bearing raceway.
2. Casting surface: According to the needs of consumers, it can be processed into a rubber coated roller. However, during logistics transportation, the rubber surface of the electric roller is a component that is more likely to be damaged.
3. Junction box: The material used is cast iron, which is relatively thin at the connection point, so it is more prone to damage.
4. Support: The material used is gray cast iron, which has the characteristics of being hard and brittle. Therefore, if there is collision or falling during lifting during the distribution process, it is easy to cause damage.
5. Motor gear: Due to the high speed of the motor gear during operation, the probability of wear and tear is also relatively high.
The above introduction is about the vulnerable parts of the electric drum. Some damages are inevitable during use, but there are some that we can avoid. Therefore, we should try our best to avoid damaging the equipment when using it.
Language
