Explosion proof electric drum is no longer unfamiliar to everyone. As for its technical parameters, let's take gear transmission parameters as an example. If you are not familiar with it, let's follow the editor to take a look!
1. The pitch circle diameter, tooth tip circle diameter, tooth root circle diameter, etc. should be accurately calculated to three decimal places. The pitch circle helix angle, pitch cone angle, top cone angle, and root cone angle should be accurately calculated to "seconds". The pitch R of spur bevel gears should be calculated to three decimal places.
2. For the convenience of manufacturing and installation, the gear pitch of the oil cooled explosion-proof electric drum produced in large quantities should refer to the standard pitch of the electric drum; The tail of the middle distance of medium and small batch production or specialized electric rollers should be as small as 0 or 5 millimeters as possible.
3. The gear structure dimensions of explosion-proof electric drum should be calculated and determined by empirical formulas, and should be as round as possible for ease of manufacturing and measurement.
4. The modulus of the drum should be taken as the standard value, and the tooth width should be rounded.
Explosion proof electric drum has a long service life, is easy to achieve centralized control, and has a wide range of applications in conveying bulk materials. Its gear transmission parameters must meet certain requirements in order to improve efficiency.
Language
